SUZUKI VL125 INTRUDER Technical Information
|
 |
| Overall Length |
2510mm |
|
| Overall width |
985mm |
|
| Overall height |
1110mm |
|
| Wheelbase |
1655mm |
|
| Ground clearance |
140mm |
|
| Seat height |
700mm |
|
Dry
mass |
239kg |
|
|
| |
|
|
| Engine type |
2-stroke, SOHC, liquid cooled, 45 degree
V-twin |
|
| Bore x stroke |
83.0 x 74.4 mm |
|
| Max.power |
51.7ps @ 6,000rpm |
|
| Max torque |
69.0Nm @ 3,500rpm |
|
| Piston displacement |
125cc |
|
| Compression ratio |
9.4 : 1 |
|
| Carburettor |
Single Mikuni BDSR34 |
|
| Lubrication |
Wet sump |
|
|
| |
|
|
| Ignition type |
Electronic (Transistorised) |
|
| Starter system |
Electric |
|
|
| |
|
|
| Clutch |
Wet multi plate |
|
| Transmission |
5-speed, constant mesh |
|
| Drive system |
Shaft |
|
|
| |
|
|
| Front suspension |
Telescopic, coil spring, oil damped |
|
| Rear suspension |
Link type, coil spring, oil damped, spring
preload 7-way adjustable |
|
| Rake / trail |
33 degrees / 141mm (5.6 inches) |
|
| Front brake |
2-piston calipers, disc brake |
|
| Rear Brake |
Drum |
|
| Front tyre |
130/90-16 tube type |
|
| Rear tyre |
170/80-15 tube type |
|
| Fuel tank capacity |
17.0 litres |
